Protection control panel

Electrical protection and control panel

The function of the diesel generator panel (protection control panel) is that from the start command to the diesel generator until the shutdown command is sent to the diesel generator. The diesel generator panel fully monitors the system and controls the set quantities to protect the system (diesel generator and its consumption load).

Diesel generator panel ((AMF diesel generator panel)) manufactured by Takin company, Goldasht panel of GMF4 type is standing with door from the front and cable entry from the bottom, or according to the request of the applicant, it is made of iron sheet with a thickness of mm2 and with baked or electrostatic painting.

The diesel generator panel is designed according to the power of the generator and the type of control is designed as a single cell.

The degree of protection of the panel is IP 43 and 44, and higher protections such as 65 can also be provided according to the requirements of the applicant. All connections and nodes and busbars are covered with appropriate cover to prevent the risk of electric shock, and the main busbar of the board ( Power busbar) is designed in such a way that it is resistant to mechanical stress in case of short circuit.

All AC and DC wires have separate colors and also have wire numbers that are placed inside the plastic duct. The equipment is of high quality and according to international standards.

Control panel, protection of control panel, protection of control panel, protection of control panel, protection

Diesel generator panel

Other advantages and possibilities of AMF panel (Diesel generator protection control panel) of Tekin Tablo company are as follows:

Control and monitoring of the feeding of the consumed load by the network or generator in such a way that the following steps are performed automatically when there is a disruption or outage in the network electricity:

• The automatic switch of the diesel generator during overload and OVER CURRENT causes the circuit to be cut off for protection.

• The diesel start operation is performed automatically with a preset delay. If the start operation does not lead to the diesel starting, the start is repeated three times with a suitable and adjustable time interval, and if the diesel still does not start, the steering wheel Interruption of the start is issued along with the alarm.

• The possibility of programming the PLC system for other functions such as connecting to the DCS and SCADA system.

• Monitoring the electrical and mechanical parameters of the diesel generator. The above automatic control panel monitors various parameters of the diesel generator and the network and protects the system against possible risks by applying the necessary commands when necessary. These parameters include the following:

• Monitoring and protection of diesel generator against oil pressure drop, water temperature increase and unauthorized speed

• Monitoring faults in the diesel generator start system

• Monitoring the voltage level and how to charge the battery

• Daily control and monitoring of the fuel level inside the tank

• Monitoring the three-phase voltage of the network and generator and protection against Over Voltage and Under Voltage

• Generator protection against unauthorized frequency changes

• Diesel generator protection against oil temperature increase

• Generator protection against Over Current&Earth Fault&Reverse Power errors with the help of protection relays

Note:

When buying a diesel generator panel and getting the price of a diesel generator panel, please specify the type of control board. Or ask our colleagues for guidance, because the use of DSE board is different from COMAP board, Woodward board, DATAKOM board, etc., besides, they have different prices.

Call to buy and know the price.

Head office: 02177584921 || Factory: 02176264670

Recommend our site to your friends